Kohler BOTTICELLI 2393-WH, Руководство по установке

Страница: 3 / 20

1. Preparation
NOTE: The lavatory center must be located at least 12
″
(30.5 cm)
from the wall.
Cut out the template along the inside line labeled
″
Cut-Out.
″
Position the template on the countertop in the desired location.
Make sure the template is secured firmly in place so it cannot
move.
Verify there is adequate clearance between the lavatory, faucet,
and backsplash.
Trace the inside edge of the template on the countertop with a
pencil.
Mark the exact centers of the four drilling holes.
For K-2333-1 only: Mark the faucet supply hole location.
Drill 5/16
″
holes at the four marked hole centers.
Cut out the sink hole along the inside of the marked cut-out line.
For K-2333-1 only: Cut or drill the faucet supply hole.
Backsplash
Mark the center of
each of the four
drilling holes.
Cut at inside
line.
Drill a 5/16" hole at
each marked spot.
Cut-out
Line
Mark the faucet
supply hole.
K-2333-1 only:
12"
(30.5 cm)
Min
Kohler Co. 3 1096633-2-A