1436350-2A-A
2
INSTALLATION
1
2
3
4
How to Install the Drain
Remove cover(5) from drain body(8). Insert drain body kit
into the lavatory from upperside.Tighten the locknut(7) by
hand from the underside of the lavatory.
NOTE:
If needed, apply a ring of plumbers putty around the
underside of the drain body, instead of using washer(6).
Place cover(5) into drain body.
5
7
6
8
How to Install the Spout
Install the mounting stud(1) onto the bottom of faucet.
Insert the faucet assembly into the lavatory hole. Position
the faucet. From underside of the lavatory, place the
bracket(2, Rubber washer is on the top) onto the mounting
stud, and tighten the nut(3) to secure the faucet.
Attach the hoses(4) to water supplies. When facing front of
the faucet, the left hose connects to hot water, the right
hose with "COLD" label connects to cold water.
