Kohler ARICA K-705250, Руководство по установке

Страница: 7 / 12

7
116897-2-
AB
Kohler Co., Kohler, WI
I. INSTALL COVERS AND GASKETS
IMPORTANT: All adjustments should be made to the
door before installing the wall jamb
cover and the expander jamb cover.
Follow the sequence below to install covers and glazing
gasket:
From inside the shower, install the wall jamb cover into
the wall jamb.
From outside the shower, position the glazing gasket
where the fixed glass panel is inserted into the expander
jamb. Push the gasket into place down the length of the
glass panel.
Inside the shower, install the expander jamb cover into
the expander jamb with the leg of the cover towards the
fixed glass panel.
Repeat the above procedures for the opposite expander
jamb.
Wall Jamb
Wall Jamb
Cover
Expander
Jamb
Expander Jamb
Cover Leg
Fixed Glass
Panel
Glazing
Gasket
J. SEALING
Thoroughly clean all dust, dirt and grease from the bottom
frame and shower ledge surfaces to be sealed. Make sure
surfaces are dry.
CAUTION: Apply silicone sealant around the
outside of the door only. Sealant applied to the
inside of the door will cause leakage and damage.
Carefully apply a bead of silicone sealant around the
outside (dry side) of door where:
1) Bottom frame meets the shower ledge.
2) Wall jambs meet the shower walls.