Kohler Aquifer 22156-NA, Руководство по установке

Страница: 7 / 28

Troubleshooting
This troubleshooting guide is for general aid only. For warranty
service, contact your dealer or wholesale distributor.
For service parts and replacement filter cartridges, visit your product
page at kohler.com.
Symptoms Probable Causes Recommended Action
1. Water leaks
between the
filter head and
the filter
cartridge.
A. An O-ring is
damaged, dirty, or
out of place.
A. Turn off the water
supply, and relieve
water pressure.
Remove the filter
cartridge and inspect
the O-rings for
damage or debris,
and ensure that the
O-rings are in place.
Replace or reinstall
the filter cartridge,
turn on the water
supply, and check for
water leakage.
2. Water leaks at
a tubing
connection.
A. Tubing is not cut
square, or is
damaged or
crimped.
A. Turn off the water
supply, and relieve
water pressure. Press
in the collar around
the fitting at the leak,
and pull the tubing
to remove. Use a
sharp utility knife to
cut 1/2
″
(13 mm) off
the end of the
tubing. Reinsert the
tubing into the
fitting. Turn on the
water supply and
check for leakage.
Kohler Co. 7 1414186-2-A