1226010-2A-B
2
1226010-2A-B
3
INSTALLATION CHECKOUT
CLEANING INSTRUCTIONS
All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with clean soft
cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc, which could adversely
affect the finish and are not recommended for cleaning.
Do not use abrasive cleaners or solvents on Kohler faucets and fittings.
INSTALLATION
NOTE:
Install mounting box
kit(1) according to the rough-in
dimensions of 98699T-NA.
Cut the protrudent part of the
mounting box kit out of the
finished wall. Unscrew the
screw(2), remove the protect
cover kit(3).
Remove the protection(5) on the
valve kit(4).
NOTE:
Don’t drop the
o-rings(6). The holes on the bottom
of the valve kit should be aligned
with the holes in the mounting box.
Install the valve kit into the mounting
box kit, tighten the screws(7).
Slide the cover kit(8) onto the valve
with the plugs(9) facing outside
(
NOTE:
Don’t squeeze out the rings
10,11). Push it against the wall.
Secure it with the screws(12).
Slide the faceplate(13) onto the valve
with slots(14) downwards. Push it
against the wall.
Screw the bonnet(15) on the valve.
Install the handle(16) on the valve
stem. Tighten the screw(18) with hex
wrench(17). Press plug button(19) to
the hole.
The illustration shown is the correct position of the handle in the closed position.
Ensure that all coupling nuts are tight.
Ensure that the handle is in the off position.
Turn on the main water supply, and check for leaks. Repair as needed.
1
2
3
4
5
6
7
8
9
10
12
11
4
19
13
14
15
17
18
16
99721T-4
99722T-4
99725T-4
99726T-4
99723T-4
99724T-4
99725T-4
99726T-4
180
15
66~96
65
80
140
The finished wall
The finished wall
15
66~96
180
80
140
