1069819-2A-B
2
CLEANING INSTRUCTIONS
All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with clean
soft cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc. which could
adversely affect the finish and are not recommended for cleaning.
Do not use abrasive cleaners or solvents on Kohler faucets and fittings.
For 9039
Determine a suitable location on the finished wall to install the
bracket. Pry between the bracket cover(6) and base(7) to separate
the two parts. Mark bracket base mounting hole locations on wall as
shown. Drill two holes in the finished wall as required, for the
installation screws and anchors. Tighten screws to secure bracket
base to the finished wall. Replace bracket cover onto bracket base.
For 9040
Determine a suitable location on the finished wall to install the
bracket. Mark bracket base mounting hole locations on the wall
according to the dimension. Drill two holes on the finished wall, the
holes should match the anchors(8). Install the anchors. Tighten
screws(11) to secure bracket base(9). Put the bracket(10) onto the
bracket base and lock by stopper.
8
22.5
11
9
7
6
10
