1312425-2A-A
2
1312425-2A-A
3
INSTALLATION
CLEANING INSTRUCTIONS
All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with clean soft
cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc, which could
adversely affect the finish and are not recommended for cleaning.
Do not use abrasive cleaners or solvents on Kohler faucets and fittings.
77981T-9
Ø70
Ø60
M28×1
44.5
61
2
4
3
As figure shown, remove and discard the protectors(1) after completing the finished wall. Turn off the valves.
For 77981T-4 & 77981T-9
Put the washers(2) into the groove of the handle kits(3, 4).
Screw the handle kits(3 or 4) to the sleeves.
NOTE:
The handle kit with “H” should be installed on the left.
For 77981T-8
Screw the handle kits(6) to the sleeves with handle wrench(5).
Uninstall the handle wrench. Remove the O-ring(7), separate it into two parts as shown.
NOTE:
The handle kit
with “H” should be installed on the left.
1
6
5
7
77981T-4
77981T-8
77981T-9
The figures show the correct position of the handles in the closed position.
