Kohler 24RCL, Операция, Страница: 40 / 76

TP-6905 9/21 40 Section 3 RDC2 Controller Operation
3.13 Genset System Menu
The genset system menu displays the system
information shown in Figure 3-13. Generator sets are
factory set and should not require changes to the
system settings in the field.
A Kohler authorized dealer or service technician can
adjust these settings, if necessary. If the generator set is
reconnected to a different voltage or the system settings
require adjustment for some other reason, see Section
3.5 for instructions to enable editing and change the
system settings.
Note: Use caution when navigating the controller
menus. In some menus, pressing the Select
button can enable editing of the controller
settings. Changing the settings to incorrect
values can adversely affect generator set
operation or render the unit inoperable.
Voltage Regulator (VR) Voltage Adjust
The generator set voltage is factory set and typically
does not require adjustment in the field. If voltage
adjustment is required, contact a Kohler authorized
dealer for service. Refer to the generator set Installation
Manual for instructions to adjust the voltage.
Fuel Type
The fuel type, LP or natural gas, is shown. Do not
change the fuel type in this menu unless the generator’s
fuel system has been converted by an authorized dealer
or service technician.
Setting the Exerciser
Use the Genset System menus to set the generator set
exerciser. Refer to Section 2.5 for instructions to set the
exerciser and for more information about exercising the
generator set.
After a scheduled exercise run, the Next Exercise time
and date will be updated automatically based on the
Exercise Frequency setting.
Language
Controllers with firmware versions 6.1 or higher can be
set for the following languages: English, French,
Spanish, Dutch, or German.
Adjusting the Display Contrast
To adjust the display contrast, use the down arrow
button to step to the Contrast menu. Press the Select
button, and then use the up and down arrow buttons to
adjust the contrast. Press the Select button to save the
contrast setting.
tp6804
Genset - - >
System
System Voltage:
240 V
System Battery:
12 V
System Phase:
Single
<- - Return
Next Exercise
06:30p 15Dec2015
Exercise Freq:
Weekly
Exercise Mode:
Unloaded Variable
System Freq:
60 Hz
Meas System:
English
Contrast:
50
VR Voltage Adj:
240.0V
Note: Actual settings may vary.
Fuel Type
LP
Language:
English
Figure 3-13 Genset System Menu