Prepare the Blower (Remote Site) (cont.)
•
Electrician pliers
•
Assorted screwdrivers
•
Adjustable wrench
•
Drill and bits to install the blower mounting fasteners
•
18 AWG non-metallic sheathed cable, two conductors with ground, with support clips, as required
•
One 4
″
(102 mm) x 2
″
(51 mm) electrical junction box with cover, gasket, and mounting screws
•
Three strain reliefs - one must fit the blower motor cover with standard National Pipe Thread (NPT)
threads. The other two must fit the holes in the new junction box.
•
Six wire connectors (wire nuts or equivalent)
•
1-1/2
″
PVC or other rigid pipe with fittings, unions, PVC cement (or equivalent fastening method),
and support clips, as required
•
Four fasteners (such as flathead wood screws or concrete anchors) to secure the blower motor
•
Solid copper 8-gauge bonding wire, 36
″
(914 mm)
1199249-2-A
4
Kohler Co.
