PI200 User Guide
Power supply
You need to 5 V on the +Vcc pin and -5 V on the -Vcc pin. Do not apply any voltage outside this range on
the board.
Setpoint
Setpoint can be adjusted between -2.5 V and +2.5 V with the SETPOINT trimmer. The setpoint can be modulated
with the SETPOINT MOD input. Modulation input is DC coupled, gain is 1 V/V, 0.1 V/V or 0.01 V/V, depending
on the MOD GAIN jumper.
Feedback sign
The sign of the feedback for FAST OUT and SLOW OUT can be chosen with the FAST and SLOW jumpers (+1 or -
1 / 2
PI200
www.koheron.com
