5
.
Applicable Devices and Device Configuration
6
5.2. Device Configuration
This guide describes the connection procedures using an NJ-series Controller.
The hardware components to reproduce the connection procedures are as follows:
Manufacturer
Name
Model
Version
OMRON
NJ-series CPU Unit
(Built-in EtherNet/IP port)
NJ501-1500
Ver.1.14
OMRON
Power Supply Unit
NJ-PA3001
OMRON
Switching hub
W4S1-05C
Ver.1.0
-
Switching hub power supply (24 VDC)
-
OMRON
Sysmac Studio
SYSMAC-SE2[][][]
Ver.1.18
OMRON
Network Configurator
(Included in
Sysmac Studio)
Ver.3.61
-
Personal computer (OS: Windows 7)
-
-
USB cable
(USB 2.0 type B connector)
-
-
LAN cable (STP (shielded,
twisted-pair) cable of Ethernet
category 5 or higher)
-
KOGANEI
EtherNet/IP Compliant
Serial Transmission Block
YS7M3L
Ver.1.1
KOGANEI
Manifold Solenoid Valve
F10M16SJ
KOGANEI
EDS file (for 32 outputs)*
YS7M3_v1_1.eds
Ver.1.0
KOGANEI
icon file
YS7Mn.ico
-
Power supply for
Manifold Solenoid Valve (24 VDC)
-
Rockwell
Automation, Inc.
BOOTP/DHCP Tool
(BootP DHCP EtherNet/IP Tool)
-
Ver.3.01.00
*If you use a Serial Transmission Block with 16 outputs, use the EDS file for 16 outputs
"
YS7M1_v1_1.eds
".
Precautions for Correct Use
Prepare the EDS file listed above beforehand.
To obtain the EDS file, contact KOGANEI CORPORATION.
NJ501-1500
(Built-in EtherNet/IP port)
USB cable
LAN cable
W4S1-05C
F10M16SJ
Personal computer
(Sysmac Studio and
BOOTP/DHCP Tool installed,
OS: Windows 7)
Power supply for
Manifold Solenoid Valve
Switching hub power supply
LAN cable
Содержание F Series
Страница 49: ...46 ...
Страница 50: ...2018 0118 0118 P691 E1 01 ...