background image

 

 
 

Power on/off 

 

To power on the earphones, simply remove the earphones from the charging case, 

earphones will automatically turn on if they are charged. 

 

To power off the earphones, put the earphones back in the charging case. 

 

If the earphones do not power on, they require further charging. 

 

Interpairing the earphones 

 

Ensure that the earphones are sufficiently charged. 

 

Remove both earphones from the charging case, earphones will turn on and enter 

the automatic interpairing mode. Wait a few seconds as both earphones pair with 

each other. You will hear a prompt tone when the connection is successful. 

Earphones are interpaired in 3-8 seconds normally. 

 

To reactivate interpairing mode, simply put the earphones back in charging case, 

wait few seconds and then follow the above procedure again. 

 

Using just left or right earphone 

 

It is possible to use just one earphone at a time. To do this, the interpairing steps 

above need not apply.  

 

Remove the selected earphone from the charging case, while leaving the other in 

the case. Close the case. 

 

The single earphone will turn on and enter the automatic interpairing mode, but 

not connect to the other earpiece. 

 

It will then be ready to use, with only left or right audio (depending on the earpiece). 

 

Bluetooth pairing and connectivity 

After the interpairing is successful, the earphones are ready to pair with your Bluetooth 

enabled device. 

 

Turn on the Bluetooth function on your device and search for T3 Pro in the 

Bluetooth menu. Select T3 Pro and you will hear a prompt tone when pairing is 

successful. 

 

Once the connection is successful, you can start using the wireless earphones. 

 

To disconnect, simply put the earphones back in the charging case and the 

earphones will automatically disconnect from any paired devices. 

 

To reconnect the earphones with the same device, simply remove the earphones 

from charging case and the earphones will automatically connect to your device. 

Ensure that the Bluetooth function on your device (computer, smartphone, etc) is 

turned on. 

        OPERATION 

Содержание T3 PRO













Отзывы: