Kogan SMARTERHOME KAWFPAC07JA, Руководство пользователя

Страница: 9 / 40

9
Installing the exhaust pipe assembly
1.
Remove the packaging from the duct interface, exhaust
pipe, and window seal connector.
2.
Straighten one end of the folded exhaust pipe and
screw the duct interface clockwise into the exhaust
pipe.
3.
Secure the window seal connector onto the other end
of the exhaust pipe, completing the exhaust pipe
assembly.
4.
Insert the duct interface end of the exhaust pipe
assembly into the air inlet on the rear panel, pushing it
to the left.
Installing the window sealing plate
1.
Open the window that is closest to where you would like to locate the air conditioner.
2.
Mount the window sealing plate assembly to the window by pulling the sealing plate
to ensure it fits snugly onto the ends of the window frame. The sealing plate can be
mounted both horizontally or vertically.
3.
Close the window so the window sealing plate touches the window.
INSTALLATION
Notes:
•
The exhaust pipe joints must be snapped into place.
•
The pipe cannot be distorted nor has substantial turning (greater than 45°).
Keep the ventilation of the exhaust pipe unblocked.
Notes:
• Ensure the air conditioner is kept upright.
•
Do not install the air conditioner in humid areas.