Kogan SMARTERHOME KASMTSSKTLA, Руководство пользователя

Страница: 6 / 32

Control Panel
Power Button To turn on or turn off the kettle.
To reset the Wi-Fi connection.
70°C, 80°C,
90°C, 100°C
Temperature Buttons To preset the keep warm temperature.
The 100°C button is used for boiling and to
reset Wi-Fi connection.
Keep Warm Button To activate or cancel the keep warm
function.
Wi-Fi Indicator Indicator Light To show Wi-Fi connection status.
Before Using Your Kettle
If you are using the kettle for the first time, it is recommended that you should clean your
kettle before use by boiling the Max capacity of water once and then discarding the water
twice. Wipe the surface with a damp cloth.
The maximum capacity of this kettle is 1.7 litres.
Using Kettle to Boil Water
1. Place the kettle and power base on a flat surface.
2. To fill the kettle, remove it from the power base and open the lid by pressing down
lid release button, then fill the kettle with the desired amount of water and close
the lid. The water level must be within the Min and the Max level. Too little water
will cause the kettle switching off before the water has boiled.
3. Plug into the power outlet and you will hear a beep.
4. Position the kettle on the power base.
5. Select a preset temperature from 70°C, 80°C, 90°C to 100°C. Press power button,
the kettle starts heating. During the heating process, the indicator lights of the
selected temperature button and the power button is turned on.
6. When water is heated to selected preset temperature, the indicator light of the
selected temperature button continues to be solid and the power button indicator
light is turned off.
MANUAL OPERATION
Note:
Do not fill the water over the ‘maximum’ line, as water may spill out of the
spout when boiling. Ensure that the lid is firmly in place before plugging the
power outlet.