13
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (‘F’ will be
flashing quickly on the LED display).
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by pressing and holding the LED display for five seconds until ‘F’ is flashing
quickly on the LED display.
Add device through network
5.
Once registered, tap ‘
+
’ in the upper right corner of the app’s home page to add a new
device through the network.
6.
Select the product type from the list of options in the app (Heating & Cooling > Fans).
7.
Ensure that the device is in pairing mode, with the ‘F’ on the LED display rapidly
flashing, and tap ‘Confirm light is rapidly flashing’.
