background image

 
 
 
 

1.

 

Turn off the power and unplug the adapter before cleaning. 

2.

 

Clean the unit with a damp cloth rather than a soaked cloth. 

3.

 

The food tank can be removed for cleaning in an automatic dishwasher. 

4.

 

Ensure to wipe the tank clean and completely dry before refilling the food. 

 
 
 
 
 

1. Unlock the screen: 

 
If no operations are input within 25 seconds, the LCD display will turn off and the feeder will 

be locked. Long-press the SET button at the bottom of the feeder to unlock the panel. 
 

2. Instant feeding: 

 
Hold the increase value (up arrow) button for 1 second to dispense one portion. 
 

3. Lack of food notification: 

 
The feeder will not dispense any food when the tank is empty. Refill the food tank, and the 

feeder will return to normal operation after you have dispensed an instant feeding. 
 

4. Remedying [E2: JA] errors: 

 
The feeder will not dispense the food when the tray is full. You need to clear the food inside 

the tray. The feeder will return to normal operation after you dispense an instant feeding. 
 

 

 

          CLEANING & CARE 

        TROUBLESHOOTING 

Содержание Pawever Pets PPCAGEDISPA

















Отзывы: