Kogan NBOLXMASSLA, Руководство пользователя

Страница: 4 / 8

1. Press the red button on the bottom of the solar panel, then install the product in a
location where it will receive direct sunlight without shadows. The built-in battery
will absorb power generated by solar panel in the daytime, and the LED laser light
will operate at night.
2. If additional power is required due to less favourable weather, connect the USB
cable to the product, connecting the other end to a power adapter (not supplied).
This will allow for emergency power supply.
3. The product can be installed in two positions as desired:
•
Screw on the spike attachment and stake the unit into the ground.
•
Screw on the base attachment to affix the unit to walls or trees.
•
If the product is installed in a location with direct sunlight (without shadow
obstruction), the charging time for the solar panel will be equivalent to when it is
connected to a power adapter via the USB cable (approximately 4 hours).
•
This is a Class II laser product with an output power of 1mW, which will not cause
fires or burns to the skin. To avoid the risk of optical damage, do not stare at the
light.
ASSEMBLY