Kogan NBLTSPBTMSA, Руководство пользователя

Страница: 5 / 8

Mounting the light
1. The light requires 4 x D-cell batteries to be installed before use. Remove the cover
and install the batteries, being careful to install them in the correct polarity.
2. Reattach the front cover by aligning the grooves and screwing in clockwise
direction, as far as it goes. Make sure the arrow is pointing at the lock symbol to
ensure the waterproof seal is tight.
3. To wall mount your light, first remove the mounting base by turning the thumb
screw anti-clockwise (Figure 2).
4. Utilise the three holes to secure the mounting base to your desired wall, using the
screws provided (Figure 3). For best results and depending on your installation
location, consider drilling three pilot holes and using the wall plugs provided.
5. Insert the light unit back into the mounting base (Figure 4). You can now rotate the
light to a full 360° to achieve the desired angle, before tightening the thumb screw
in clockwise direction.
6. You can also pivot the light up and down to your desired angle by loosening the
upper thumb screw in anti-clockwise direction (Figure 5). Once the angle is set,
tighten the thumbscrew in clockwise direction.
Figure 1 Figure 2
Figure 3 Figure 4 Figure 5