Kogan KGNBD2VBA, Инструкция по эксплуатации

Страница: 25 / 29

TROUBLE SHOOTING
23
Auto open in reading
the disc.
The disc is dirty or any scratch.
Try to reset the unit and press STANDBY/ON button, wait for 5 seconds,
and then press this button again.
the format of the disc is not supported.
Audio and video
momentarily pause in
reading disc.
Check the TV system setting, switch PAL/NTSC TV system in setup menu.
The disc is dirty or any scratch.
Try to reset the unit and press STANDBY/ON button for 5 seconds, and
then press this button again.
The unit is on with start
logo and menu but has
no image from the disc.
The disc is dirty or any scratch.
Try to reset the unit and press STANDBY/ON button, wait for 5 seconds,
and then press this button again.
The unit freezes in reading
CD-R/DVD-R disc
Reset the unit, when you see “ loading ” on the screen, press
OPEN/CLOSE button to take out the disc, clean the disc and try it again.
If the unit freezes again, The disc may have some contents the unit
can't support, please stop playing the disc in this unit.
TV screen and video
The images from this unit do
not appear on the television.
Picture is distorted.
Make sure that the television is connected to the VIDEO OUT terminal,
COMPONENT VIDEO OUT terminals or HDMI AV OUT terminal on this
unit.
Make sure that the television ’ s input setting (e.g., VIDEO 1) is correct.
Video is not output in high
definition.
High definition video cannot be output through the VIDEO OUT.
Confirm that the HDMI Resolution and Component Video Resolution in
the Setup menu are set properly.
Depending on the BD-Video, output from the COMPONENT VIDEO OUT
terminals may be restricted to 480p/576p.
The 4:3 aspect ratio picture
expands left and right.
Screen size is wrong.
Use the television to change the aspect. Refer to your television s
operating instructions.
When using a component video cable, set “ TV Aspect ” to “ 4:3 Pan &
Scan ” .
There is no apparent change
in picture quality when
adjusted with the Video menu
in the on-screen menu.
The effect is less perceivable with some types of video.
Try to reset the unit and press STANDBY/ON button for 5 seconds, and
then press this button again.
The device is likely to enter screen saver status .
When it is playing BD-LIVE
disc, Video output is black
screen, please according
right methods to checking
and operating
Selecting Clear BD storage on menulist, having restart signal or not after
closing working.
Please check the internet is ok or not. Some of the disc need the support
of internet.
Please check the plug with connecting cable,if it is loose, pls insert again.