Note: According to the computer system configuration or difference, the computer may not
detect a camera function by once. If the computer can not enter the camera function, but
instead views the watch as a USB disk, please remove the camera and connect the camera to
the computer again.
Please connect the data cable to the device at first, then connect the other side to the
Computer, and make sure to connect to computer before the LED light change to blue for
standby mode.
Camera(Mode):
1. Take photo:
Press the Camera (Mode) Button, when a picture is taken the red light flashes once.
Note: Make sure there is adequate light in the surrounding and the camera is not blocked by
other items. Keep the camera upright and stable. Please ensure the object being photographed
is more than 50cm from the camera.
2. Record Sound:
Press and hold Camera (Mode) button till the red lights blink 3 times. This means the camera
is in sound recording mode. Briefly press the operation button once to stop recording, save
the file, and return to standby mode.
USB
1. Connect the computer:
Unscrew the USB sealing Knob.
In standby or OFF mode, you can then connect the device with the computer. The computer
will pop up a removable disk menu. There is an image file directory for: * Disk \ _REC \
100MEDIA. During video recorder and computer transfer data, the blue light flashes rapidly.
For disconnection, please click ‘SAFELY REMOVE HARDWARE’ on the right bottom
corner of the task bar. Then click to stop the ‘USB mass storage device’. Once operation
completes you can unplug the USB and the disconnection is complete.
Note: According to the computer or system configuration, there will be slight differences in
the time taken to identify removable disks. Please be patient. During this period, please do not
press buttons so as to avoid adverse results. If the computer does not identify the removable
disk after an unreasonably long time, disconnect and reconnect the device again. If the
computer is unable to identify the hardware at all, make sure your operating system, drivers
and USB cable are all in normal condition. Please make sure to disconnect the device in
accordance with the normal process to avoid the possible damage for computer and recorder.
Содержание KAWTC8GSPYA
Страница 1: ...KAWTC8GSPYA USER MANUAL ...
