Kogan KAWLM70TLTA, Руководство пользователя

Страница: 7 / 16

Step 2:
Concrete and masonry walls
Use a spirit level to double check the correct angle of the mount and mark the intended hole
positions with a pencil (
2b
). Drill holes in the desired locations (95mm deep, 12mm wide) (
2b
).
Insert the screw anchors (W-B) into each pre-drilled hole, then insert the top screw (W-A) first
to support the mount (
2c
). With the wall mount held in place, insert the washers and screws
(W-C, W-A), tightening with a socket wrench (
2d
).
A minimum of two people are recommended for this installation. Failure
to use safety gear and safe working methods may result in property
damage, serious injury, or death.