Kogan KAVACACL06A Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 40

Kogan KAVACACL06A Скачать руководство пользователя страница 19

Cleaning Mode

•

After the robot starts, it will scan and generate a map and divide it into areas
automatically. The robot vacuum will vacuum areas one-by-one in an efficient
pattern. The machine will return to the charging base automatically after it is
finished, or if it is low in battery.

Do not move the machine during use. If the machine is moved, please put it back in the
position it was in and it will attempt to reposition itself when it restarts. If it is relocated
successfully, the vacuum will continue working according to the planned route. If it is not
successfully relocated, the robot will rebuild the map, but may not be able to be charged
without manual intervention.

Spot Cleaning

As an alternative to using the app, you can manually move the robot to an area for spot
cleaning. To activate spot cleaning press and hold the “Home” button for 3 seconds and the
robot will vacuum the floor twice in a 1.5 x 1.5m area.

«
...
17
18
19
20
21
...
»

Содержание KAVACACL06A









































Отзывы:

Нет отзывов