Kogan KAMOP151STMA, Руководство пользователя

Страница: 24 / 28

Issue Possible Cause Troubleshooting
Residue in the water tank
(first use).
The residue left over from
quality control testing.
This is normal and not cause
for concern.
Unit fails to heat up or power
indicator does not illuminate.
Unit is not plugged in or
turned on.
Plug electrical cord into an
electrical outlet, and turn the
steam adjustment dial to any
setting above ‘off’.
Household circuit breaker/
ground fault interrupter has
tripped or blown a fuse.
Reset circuit breaker/ground
fault interrupter or replace
the fuse. If you need
assistance, contact a
licensed electrician.
The unit heats up but fails to
produce steam.
NOTE:
Always allow time for
the unit to heat up begin
producing steam. The light
will turn green.
Water tank is empty. Refill water tank.
Mineral build-up in the unit.
Refer to removing mineral
build-up section (Cleaning &
Care).
The weighted brass ball
connected to end of water
tube inside water tank has
come loose.
Reattach it by snapping it
back onto black nozzle at
end of tube.
Not holding Steam button.
Press and hold Steam button
to use.
The steam output is weak or
intermittent.
Steam adjustment dial is set
too low.
Increasing the setting of the
steam adjustment dial to a
higher level will result in a
stronger flow of steam.
Mineral build-up in the unit.
Refer to removing mineral
build-up section (Cleaning &
Care).
Unit is emitting water in the
steam flow.
Steam adjustment dial is set
too high.
At the Max setting, small
amounts of water may be
released along with the
steam. Decreasing the
setting of the steam
adjustment dial to lower level
will reduce this water
spotting.
Rattling sound from water
tank.
Sound is being caused by
weighted brass ball
connected to end of water
tube inside tank.
The weighted brass ball is an
intentional design that helps
the unit more efficiently
utilise all water inside of tank.
TROUBLESHOOTING