Keep the foam underneath the monitor before attaching the stand.
1
.
Open the package, take out the product with foam still attached, and gently place
it on a desktop or table. Then take out the stem, cable clip, and base, use the
screwdriver (not included) and one screw to fasten base to the stem.
2
.
Remove the foam covering the bottom of the monitor, then remove the converter
on the back of monitor. Then use two screws to fasten converter onto the stem.
3
.
Attached the converter with stem and base back onto the back of monitor, Then
remove the remaining foam on monitor and stand it on desktop. Press the button
to remove the montior from the bracket and easily unmount it.
Stand Assembly
5
Screws x 1
Stand
Stem
Cable
Clip
Base
Converter
Screws x 2
Make sure the monitor is laid on a flat surface before removing the stand.
Button
