Kogan KAMN28UHFSA, Быстрый старт, Страница: 7 / 16

VESA mount
Follow the steps below to install onto a monitor arm or wall mount (not included).
1. Place the mounting plate onto the back of the LED monitor, lining up the holes of
the plate with the holes in the back of the monitor.
2. Insert the 4 screws into the holes and tighten.
3. Assemble the mount as per the instructions provided with the mount.
4. Connect the power and display cables to the monitor.
Note:
The 100 x 100mm VESA pattern requires 4 x M4 screws and a pitch of 0.7mm.
Screw mounting kit is not included.