Kogan KAMDUALFZCA, Быстрый старт, Страница: 21 / 24

21
Cleaning & Care
What? How? Important!
Everyday soiling on glass.
(fingerprints, marks, stains
left by food or non-sugary
spillages on the glass)
1. Switch the power to
the cooktop off.
2. Apply a cooktop
cleaner while the glass
is still warm (but not
hot!).
3. Rinse and wipe dry
with a clean cloth or
paper towel.
4. Switch the power to
the cooktop back on.
• When the power to the
cooktop is switched off, there
will be no ‘hot surface’
indication but the cooking
zone may still be hot! Take
extreme care.
• Heavy-duty scourers, some
nylon scourers and
harsh/abrasive cleaning
agents may scratch the glass.
Always read the label to
check if your cleaner or
scourers is suitable.
• Never leave cleaning residue
on the cooktop: the glass may
become stained.
Boil-over, melting and hot
sugary spills on the glass
Remove these
immediately with a fish
slicer, palette knife or
razor blade scraper
suitable for induction glass
cooktops, but beware of
hot cooking zone surfaces:
1. Switch the power to
the cooktop off at the
wall.
2. Hold the blade or
utensil at a 30° angle
and scrape the soiling
or spill to a cool area
of the cooktop.
3. Clean the soiling or
spill up with a dish
cloth or paper towel.
4. Follow steps 2 to 4 of
‘Everyday soiling on
glass’ above.
• Remove stains left by melts
and sugary food or spillages
as soon as possible. If left to
cool on the glass, they may
be difficult to remove or even
permanently damage the
glass surface.
• Cut hazard: when the safety
cover is retracted, the blade
in a scraper is razor-sharp.
Use with extreme care and
always store safely and out of
reach of children.
Spillages on the touch
controls
1. Switch the power to
the cooktop off.
2. Soak up the spill.
3. Wipe the touch control
area with a clean damp
sponge or cloth.
4. Wipe the area
completely dry with a
paper towel.
5. Switch the power to
the cooktop back on.
• The cooktop may beep and
turn itself off and the touch
controls may not function
while there is liquid on them.
Make sure you wipe the touch
control area dry before
turning the cooktop back on.