11
Display
For the first power-on, the full display lasts 3s while the start-up tone
rings, and then the panel displays normally. When first powered on,
default temperatures of refrigerating and freezing chambers are 5°C
and -18°C, respectively.
During first power-on, if the ambient temperature is above 38°C, it
is recommended that the unit be set to 2°C refrigeration and -16°C
freezing for fast and balanced cooling.
If an error occurs, the fault code will display instead of temperature.
Display control
With no key operations or door opening for 30 seconds, the display
screen will display LOCK and then go to sleep after a further 30 seconds
under the locking state. When the display screen is off, it will light up
normally with key operations.
Lock / Unlock
When unlocked, hold the lock/unlock button for 2 seconds to lock.
Likewise, when locked, hold the lock/unlock button for 2 seconds to
unlock. The system enters the locking state automatically without
any key operation for 30s. Door opening alarm and fault alarm can
be relieved while locked, but the system needs to be unlocked for any
additional information. Any input aside from the unlock method will
result in a buzzing noise, indicating an incorrect input.
Refrigeration settings
Press the Ref.Temp button to select the area of refrigerating
temperature and then press the key again to adjust the temperature.
The temperature drops 1°C for pressing the Ref.Temp button once;
press the Ref.Temp button again after the temperature reaches 2°C,
the refrigerating chamber is set to 8°C. The temperature setting of
refrigerating chamber varies between 2°C ~ 8°C, which will be effective
upon locking.
Freezer settings
Press the Frz.Temp button to select the area of freezer temperature and
then press the key again to adjust the temperature. The temperature
drops 1°C for pressing the Frz.Temp button once; press the Frz.Temp
button again after the temperature reaches -24°C, the refrigerating
chamber is set to -16°C. The temperature setting of refrigerating
