Kogan KAM237UPSFA, Руководство пользователя

Страница: 8 / 20

8
INSTALLATION
(cont’d)
2. Reversing the door swing
a.
Remove the top right hinge cover.
b.
Using a Phillips head screwdriver,
remove the screws that fix the top
hinge into place.
c.
Remove the nut with sleeve and swap
the hinge shaft sleeve to the other
side, fixing it into place with the same
screws. Figure 2c
Figure 2e
Figure 2f
Figure 2d
door block
TOOLS REQUIRED
Phillips head screwdriver, flat-blade
screwdriver, and hexagonal spanner.
NOTE
Ensure unit is unplugged and empty.
Figure 2a
Figure 2b
d.
Remove the door limit block from the
bottom of the door and move to the
other side of the door. Fix it into place.
e.
Using a Phillips head screwdriver,
remove the screws fixing the bottom
hinge. Whilst removing the bottom
hinge, ensure the fridge incline angle
is less than 45 degrees – do not lay it
flat.
f.
Follow the same procedure as the
upper hinge, fixing the bottom hinge
into place on the other side of the
unit.