Kogan KALED55XXXWC, Руководство пользователя

Страница: 11 / 16

Menu Operation
Picture Menu
Picture Mode
: Select your desired picture mode from Dynamic, Standard,
Mild and Personal.
Brightness : Adjust image black level.
Contrast : Adjust image contrast.
Sharpness : Adjust the sharpness (unavailable in VGA/PC mode)
Saturation
: Adjust image colour from black and white.
Hue
: Control the image tint (available in NTSC mode only)
Colour Temp
: Select an optimum colour temperature mode to suit your eyes for viewing from
Warm, Cool or Standard.
Aspect Ratio : Change the aspect for the screen from 4:3, Full, Zoom1 or Zoom2.
Noise Reduction : If the broadcast signal is weak, you can select this to reduce the video noise
level. (Not available in DTV mode).
Sound Menu
Sound Mode : Select your desired audio mode as following: Standard, Music,
Personal, Movie. (You may select the sound mode directly by pressing the
SOUND button on the remote control.)
Treble : Adjust the treble effect. Increases or decreases high-pitched sounds.
Bass : Adjust the bass effect. Increases or decreases lower-pitched sounds.
Balance : Adjust the balance between the left and right speakers to adapt to your listening
position.
Surround Sound : Turn on/off the surround sound function.
EQ Settings
: Adjust Equalizer settings.
AVL
: Activate or deactivate the Auto Volume Limited function.
SPDIF : Select the spdif mode for the TV from off, PCM and Auto.
Channel Menu
Make changes to the channels to suit your viewing requirements.
You can edit Auto Scan, Manual Tuning, Channel Edit and Signal Information.
Auto Search
: Enters the Auto scan menu to start the auto scan. It will scan
the analog signal channel first, then search for digital signals. Before
executing the auto channel search, please confirm whether your antenna
type is Air or Cable.
Digital Manual Search : Press the OK button to enter the digital manual scan menu.
Analog Manual Search : Analog signals are no longer transmitted in Australia.
Channel Edit : Press the OK button to enter the Channel Edit menu as shown
in the picture to the right.
•
Delete: Press RED to select the channels you wish to delete.
•
Skip: Press GREEN to skip the channel or cancel the setting. The
channel will then not be shown when using the
CH+
/
-
buttons.
•
Move: Press
BLUE
to select the channel, then press / to move the
▲ ▼
channels and OK to confirm.
Signal Information
: Displays signal information in DTV mode.
10