Kogan KALED43UHDZA, Руководство пользователя

Страница: 14 / 35

Basic Operation
Turning the TV on and off
1. Insert the power cord into a power outlet.
2. If the TV is in standby mode, press the POWER
button on the remote control or the “ ” button
on the bottom panel of the LED TV.
3. Normal picture will be displayed on the screen
after approximately 15 seconds. If no signal input is
detected, “NO SIGNAL” will be displayed on the screen.
4. If temporary power off is required, press the POWER button on the remote
control or the “ ” button on the bottom panel of the LED TV.
5. If you want to completely switch off the power to the unit, unplug the
power cord from the wall completely.
6. After switching the unit off, you should wait at least 5 seconds before
switching it back on.
Status Indication Lamp
White: standby mode
No light: power on
Auto Power-off
1. If there is no signal, the TV will automatically enter standby mode after 10
minutes.
2. In VGA mode, if there are no operations after 15 seconds, TV will enter
standby mode.
Memory before turning TV off
The picture and sound settings and preset channels will be memorised at the
point when the TV is turned off. When the TV is starting up again, it will come on
with these settings again.
Setup Wizard
When you first boot up the TV, you will enter the TV guide system.
OSD Language Setting
1. Press / to select your language.
◀ ▶
2. Press the key and then press OK to enter the next step. ▼
13