23
Water container emptied
Water container collects all of the water from condenser. Water container need to be
emptied after every drying cycle. If the water container is full, an active program will break
off automatically. The light will comes on and the buzzer sounds. In order to continue the
program, the water container must first be emptied.
•
Pull out water container
•
Tip water into pool
•
Pull the water container in dryer
•
Press the Start/Pause button
Humidty sensor
In the movement process, this device is used for induction clothing humidity, it means that it
must be carried on cleaning. Major cause of clean is must scour out the calcium oxide boiler
which on the sensor surface up. Clean the sensor in the tumbler (see image below).
WARNING:
Always clean the lint filter and the inner surfaces of the
loading door after each drying process.
Water tank
