Step 2:
Tear off the protective film on the 3M sticker, apply it on a smooth wall surface at the appropriate
height. Hang the device on the bracket from top down lining up the hole at back of device. Tighten the
screw on the bottom of the unit to the bracket.
Method 2
If you want to install the device on a rough wall (such as concrete, brick or a wooden surface), use screws
to fix the bracket. This should only be completed by someone who qualified in this type of maintenance.
1. Mount the bracket on the wall at the appropriate height and mark the location of the screw holes.
Drill the holes and fasten the mount to the wall with the screws.
2. Hang the device on the bracket from the top down lining up the hole at back of device. Insert the
bottom screw.
4
