Kogan KADCFAN3N1A, Руководство пользователя

Страница: 10 / 16

Timer
The timer can be set to either turn the fan on or off after a specified period between 0.5–12
hours.
Setting the timer to turn on the fan
There are two methods. Applicable to both methods, ensure the fan is in standby when
setting this timer.
• Using the control panel:
1.
Press and hold the oscillation/timer button for two seconds.
2.
Repeatedly press the oscillation/timer button to adjust how long you wish the
timer to last. This will be reflected on the display (0.5–12). Once adjusted, do not
touch the control panel. Wait for six seconds.
3.
Press the fan speed button to adjust the speed at which the fan will operate when
it turns on (1–12).
4.
Once adjusted, do not touch the control panel. Wait for three seconds. The display
will flash twice and beep to confirm the timer has been set.
•
Using the remote control:
1.
Press the timer button to enter the timer settings.
2.
Repeatedly press the timer button to set the timer to the desired number of hours.
Each press will increase the timer by one hour. This will be reflected on the display.
Setting the timer to turn off the fan
There are two methods. Applicable to both methods, ensure the fan is turned on when
setting this timer.
•
Using the control panel:
1.
Press and hold the oscillation/timer button for two seconds.
2.
Repeatedly press the oscillation/timer button to adjust how long you wish the
timer to last. This will be reflected on the display (0.5–12).
3.
Once adjusted, do not touch the control panel. Wait for six seconds. The display
will flash twice and beep to confirm the timer has been set.
Notes:
•
If you wish to reset the timer, press and hold the oscillation/timer button.
• Pressing the Power button will cancel the timer and turn on the fan.
Notes:
•
To check how much time is left on the timer, press and hold the
oscillation/timer button. The time left will be shown on the display. If you
would like to adjust the timer, immediately press the oscillation/timer
button and adjust accordingly.
•
If nothing is pressed for six seconds, the current timer will remain set.