Kogan CTROTOTOOLA, Руководство пользователя

Страница: 7 / 12

Speed adjustment
The speed switch is located on the rear of the tool; turn it to increase or reduce speed.
Do not change the speed while the tool is operating.
Use the tool at low speed for polishing and similar operations, and high speed for drilling or
cutting actions.
Tips
•
After use, always disconnect your power tool.
• Your rotary tool will become warm after prolonged use and so must be switched off
and allowed to cool down completely.
• To ensure smooth operation, the spindle should be oiled periodically.
•
Use clamps or a vice to hold your work in position; this is much safer than using your
hand and it frees both hands to operate the tool.
•
Do not apply too much radial pressure to the accessory bits while polishing, cleaning,
sanding or grinding. By doing this you will put excessive strain on the spindle and
adversely affect the precision of the tool.
• Always work with a gentle touch so as not to impede the efficiency of the tool.
•
When drilling metal, always mark the drilling point with a centre punch first so that
your rotary tool does not slip.
•
Always ensure that you have maximum contact between the accessory shaft and the
collet chuck.
•
Vary the speed on the tool for the work on hand, for example, using low speed for
polishing and cleaning and high speed for engraving.