27
English
Operation
Washing dishes
Fig.
8
Consider following steps to start the
washing process:
1. Prepare dishwasher.
2. Load the dishwasher basket.
3. Add detergent or rinse aid.
4. Make sure the water-tap/water
supply is open, the appliance is
connected to the mains and the door
is closed correctly.
5. Push Ein/Aus switch to turn on
the dishwasher and choose your
program, refer to chapter
Choosing
Program
.
Note:
If only one basket is used you can
switch off the unused rinsing zone.
Press the rinse zone selection
button
to select the desired
rinse zone. Observe the indicators
or
.
6. Push
Start/Pause
button. To stop
the process push again
Start/Pause
button.
Note:
• We recommend to use the half load
function if the dishes are only slightly
soiled.
• Select the extra dry function if you
want the dishes to be extra dry.
• The functions half load and extra dry
cannot be selected at once.
• These modes can only be used with the
program setting Intensive
, Normal
,
ECO
, Glass and 90 min
.
Fig.
7a
Observe the plan for placing cutlery
into the cutlery basket. See table below
for possible part designations.
1
Soup spoons
2
Forks
3
Knives
4
Teaspoons
5
Dessert spoons
6
Serving spoons
7
Serving forks
8
Soup ladle
Fig.
7b
The cutlery tray can be adjusted
according to your needs.
I. standard position, both halves
inclined
II. left side flat, right half inclined
III. both halves flat, right half increased
IV. left flat, right open, right half
moved over the left half
V. left flat, right open, right half
removed
IM_KDW 60121 A2 BI_170711_V04_HR.indb 27
11/7/17 8:47 am
