MOUNTING THE CARRY COT OMEGA
Ω
ONTO THE FLEXXO
•
Position the adjustable footrest horizontally. Picture 11
•
At the foot end of the carry cot is a safety belt. Undo this.
•
Disassemble the closure of the safety belt paying close attention to
how the belt is threaded through the fastener. Bring the safety belt
around the tube at the rear of the frame and guide it through the D-
ring. Re-fasten the clip to the safety belt. Picture 12
•
Position the carry cot onto the frame in such a way that the hood
just touches the frame.
Picture 13
•
Now push the carry cot forwards as far as possible. Picture 14
•
The carry cot is now fixed. Confirm that all of the catches
underneath the cot are attached properly
to
the frame
.
Picture 15
You can check this by lifting the carry cot both at the front-end and
at the back-end. It is fitted correctly if it does not come undone from
the frame.
•
Now place the closure of the safety belt into the matching part of
the carry cot (so it can no longer come out). Adjust the length of the
belt so it connects properly.
•
To release the carry cot, unfasten the safety belt and pull the cot
backwards. Picture 13 Then remove the carry cot via the front of
the frame (Never do this with your child in the carry cot). You can
now place the carry cot on a hard, even and stable surface, or fold
it into a small package for transport.
ASSEMBLY AND DISASSEMBLY OF THE SEAT AND HOOD
•
The bottom part of the seat can be slid over the adjustable footrest.
Picture 16
•
Attach all of the snaps on both sides of the seat to the frame.
Picture 17
•
Guide the short part of the 5-point safety harness through the
buttonhole in the seat and fasten this to the connection rod using
the snap. Picture 16/Picture 18
•
Under the seat are two plastic catches. Click these onto the
connection rod. Picture 16
•
Pull the back-rest adjustment strap through the loops on both sides
of the seat and through the buckle. Then pull the cloth part at the
back of the seat over the back-rest adjustment strap. Picture 17