Koelstra BINQUE Daily, Инструкция по эксплуатации

Страница: 24 / 32

MaMbo Daily
14
4.3 Hanging up the ride-along board
Attention!
• The ride-along board can only be hung up if the seat is
facing forwards in the direction of travel.
1. Place the ride-along board in the long mode.
2. Rotate the hanging loop forwards.
3. Attach the hanging loop to the designated pin on the
frame (see fig. 31).
4.4 Removing the ride-along board
The ride-along board has its wheels on the ground.
1. Press the slanting adjustment buttons on the upper side
of the rear axle (see fig. 30) and detach the ride-along
board from the frame.
5 Folding up and transporting
5.1 Folding
Warning!
• Always remove the carry-cot from the frame before
folding the pushchair.
Caution!
• Always place the seat in the direction of travel before
folding the pushchair.
• To avoid any damage, do not place any objects on or
against the folded product.
Attention!
• Empty the shopping basket before folding the pushchair.
• Always store folded products away from children.
Tip
• When the pushchair is folded, cover the wheels with a
cloth to prevent dirt and/or smudges from soiling the
upholstery.
1. Engage the pushchair's parking brake.
2. Remove the ride-along board if it is attached.
3. Fold up the seat canopy.
4. Place the seat upright.
5. Fold down the leg rest.
6. Place the seat in the direction of travel, or remove the
carrycot, the adapters or the car seat from the frame if
they are assembled together.
7. Stand behind the push bar.
8. Using your thumb, press the button on the fold-up lock
(on the left hand side of the push bar, at the top) and
keep it depressed (see fig. 32).
9. Now simultaneously pull the fold-up lock at the left hand
side and the right hand side of the pushchair towards
you.
The frame is now unlocked.
10. Push the push bar towards the swivel wheel (see fig. 33).
11. Attach the transport lock to the designated pin on the
frame (see fig. 34).
12. Press both push bar adjustment buttons and fold the
push bar completely towards the frame (see fig. 35).
13. Remove the wheels if you wish.
5.2 Transporting
Warning!
• Never lift the entire pushchair by the safety front brace.
Caution!
• Transport the pushchair with care. The frame and the
upholstery can be damaged if you bump or scrape it.
The pushchair is folded.
1. Check that the transport lock is secure.
2. Lift the folded pushchair by its frame.
6 Disassembling
6.1 Removing the seat from the frame
The safety front brace is attached to the seat.
1. With one hand, grab the safety front brace.
2. Use your other hand to press the button of the central
lock on one side of the pushchair (see fig. 36).
3. Now press the button of the central lock on the other
side of the pushchair.
4. Lift the seat from the frame.
6.2 Removing the safety front brace
1. Press the unlocking button on one side of the bottom of
the safety front brace and pull the safety front brace away
from the seat (see fig. 5).
2. Repeat the above step for the other side.