Koehler K87170, Руководство по эксплуатации и инструкция

Страница: 9 / 39

System Preparation
Preparing the System
Operational Checks
1. Check the condenser bath level. The level should be maintained above the coil
inside the bath.
2. Verify that a clean receiver is in place and empty. The metal drip trough should
be pointing directly to the front of the unit. The metal drip trough should also be
touching the side of the receiver.
3. Verify that the receiver joint is greased.
4. Put dry ice in the cold trap.
5. Check the vacuum pump oil level. It should be near the high mark.
Electrical System Check
1. The Control Unit power should be in the ON position.
2.
The Condenser Bath power switch should be in the ON position.
3. The Vacuum Pump power switch should be in the ON position.
System and Sample Preparation 3-1