FV-KODOS video
capture board
Video cameras
Connection diagram of video sources and the video capture board
The video capture board is installed in the PCI slot of computer motherboard.
The computer should be positioned on a horizontal surface far from heat, moisture
and electromagnetic radiation sources.
Due to significant release of video/audio capture boards, ensure additional cool-
ing of the area of installation of the boards if more than three units are installed in the
system block body
Notes on Operation
1 The video capture board is used in the KODOS-VIDEONETWORK com-
puter-based video surveillance system (or KODOS Video surveillance system), oper-
ating under control of the computer.
2 Video capture board is designed only for operation under the control of
KODOS-VIDEONETWORK software.
3 Before beginning operating a video capture board, install FV-KODOS driv-
ers.
4 The installation procedure of drivers is described in the install.txt file, in-
cluded in the installation disk of KODOS-VIDEONETWORK software.
5 The board is the video capture unit, allowing accepting up to four video sig-
nals. Video signals are input by their multiplexing (switching).
Functionality of a video capture board can be checked with special testing utili-
ties:
a)
SSA_CAP_TESTS.exe
– checking operation of one channel;
b)
SSA_CAP_TESTM.exe
– checking operation of four channels.
KODOS-VIDEONETWORK software c/w these utilities.
