Kodicom KSR-304N, Руководство пользователя

Страница: 110 / 112

110
110
KSR
KSR
-
-
304N
304N
The connected sensor is not operating.
The connected control device is not operating.
Color of some camera videos are strange or videos are shown abnormally.
☞
Check if the camera connected to the system has a problem. Check to make sure the camera
is not damaged by trying another camera into a working video output.
☞
Check if the video system setting is the same with your camera system. Depending on your
region, the camera system can support either PAL, or NTSC. Depending on the camera system,
the video process can differ greatly, therefore it can be difficult to recognize the video data if the
video system setting is different from the camera system.
☞
Check if the type of sensor in camera setting is the same with the connected sensor.
☞
Check if the system is set to use the sensor in recording schedule window in the recording setting menu.
☞
Check if the power cable of the sensor is properly connected.
☞
Check if the signal cable of the sensor is properly connected.
☞
The system can restart itself due to watchdog function when any problem occurs to KSR-304N.
☞
Remove HDD and check if the system stabilizes, if so replace or format original HDD.
9 Sometimes the system restarts itself.
☞
Check if the system is set to use the control device in the camera setting menu.
☞
Check if the power cable of the controller is properly connected.
☞
Check if the signal cable of the controller is properly connected.
11
7
There are a lot of (screen) noise on the image.
8
☞
Check if the video signal output from the camera has a problem. Check to make sure the
camera is not damaged by trying the camera on another video input or direct to monitor.
☞
Check if the video cable connecting the camera and KSR-304N DVR is cut, cross-wired, or
shorted.
☞
Check if there is a high voltage wire around the video cable connecting the camera to KSR-
304N DVR system. It can cause the noise problem to decrease video quality.
☞
Check if the video cable connecting the camera to KSR-304N DVR system is the correct video
cable. When a normal power-supplying cable is used instead of the video cable, screen noise
can be generated.
10