5
Before starting, read and understand all safety instructions
included in this manual
Starting Operation
1.
Locate the generator on flat terrain, away from water hazards and/or
flammable liquids. Check all electrical cords for cracked or exposed
wires. Replace if necessary.
2.
Follow the engine starting procedures contained in the Honda Engine
Owners Manual. Once started, allow the engine to reach operational
temperature for a few minutes without applying load on the alternator.
3.
Make sure that the appliance is switched off before connecting it to the
generator. Do not move the generator while it is running.
4.
Be sure to ground the generator if the connected appliance is grounded.
Failure to ground the generator may lead to electrical shock.
5.
If the generator is overloaded, or short-circuited, a breaker switch is
automatically tripped, preventing electrical current from being supplied
to the appliance. Check the appliance to ensure that the start-up wattage
requirements does not exceed the capacity of the generator. Press the
reset button.
Shutdown Procedure
1.
Turn off the power switch of the electrical appliance and disconnect from
the generator.
2.
Allow the engine to cool down for approximately 3 minutes at no-load.
3.
Refer to the Honda Engine Owner’s Manual for engine shutdown
procedures.
4.
Remove any mud, dirt or condensation from the generator. Store in a dry
place.
Maintenance and Storage
(Please refer to the Honda Engine Owner’s Manual)
Periodic inspection and maintenance of the Honda engine are essential if a high
level performance is to be maintained. Regular maintenance will also ensure a
long service life. The required service intervals and kind of maintenance to be
performed are described and outlined in the Honda Engine Owner’s Manual.