Kodiak KD3000VR, Руководство пользователя, Страница: 6 / 14

- 4 -
NOTICE
TEST RESET TEST RESET
Starting the engine:
1. Read Honda Engine Owner’s Manual.
2. Open fuel valve.
3. Set chock lever towards the “Close” position when engine is cold.
If engine is warm, chock lever should be moved to the “Open” position.
4. Set the engine switch to the “Run” position.
5. Pull on starter rope with a fast steady pull to start the engine. (Diagram 2)
6. After engine has started, move the chock
lever back gradually to the “Open” position.
7. Once the engine is running at normal
speed, useable AC power is available.
Diagram 2 : Starting the engine.
Applying AC load (single voltage type) (Refer to Diagram 3):
1. Place generator’s “circuit breaker” switch in the “ON” position.
2. Start engine (Please refer to the Honda Engine Owner’s Manual.)
3. Allow the engine to warm up for 2-3 minutes before connecting tools or appliances.
4. Insert the plug of the electrical appliance into the “AC receptacle”.
5. Place generator’s “circuit breaker switch” in the “ON” position.
6. Reset the GFCI receptacle.
How to use GFCI receptacle
1. When the indicator LED is “on”, there will be no Power
at the GFCI receptacle.
2. Press the reset button to turn “off” the indicator LED , then
power will return.
Operation
Recoil Starter Handle
Indicator LED
is “off”
Indicator LED
is “on”
No power
Power is supplied.