Copyright 2013, Kodiak Networks, Inc.
kodiaknetworks.com
7
Removing the Battery:
Complete the following steps to remove the Carbonado battery from your UA400 phone.
Charging the Battery:
The battery provided with your mobile phone does not come fully charged. We recommend that
you charge the phone at least for five hours before you use it for the first time.
Note:
With a fully charged battery, the phone can remain in standby mode for up to 800 hours. If
the battery is completely out of charge, the charging icon appears only after several minutes when
the charger is connected.
Do not use an incorrect battery type as it may cause explosion.
Complete the following steps to charge the phone battery.
1.
Plug the charger into a power outlet.
1.
Rotate both battery cover screws in counter
clockwise direction (as shown in the figure).
You can use the key/screwdriver to open
the back. Sometimes the screws may be
tight and extra effort is required to open
them.
2.
Lift the battery cover to view the battery
slot.
3.
Raise the upper end of the battery from the
slot and remove the battery.
4. Close the battery cover. Rotate the battery
cover screws in clockwise direction. You can
use a key/screwdriver to tighten the screws.
Ensure not to over tighten.
