Koden KDS-1100, Руководство по эксплуатации, Страница: 26 / 46

Chapter 1 Basic Operation KSD-1100/1210
0093107083-01 1-8
1.6 Navigation operation
Navigation data and MOB* can be used to navigation.
1.6.1 Call Navigation Data / MOB to navigation
Method 1:
Click to select the data that want to navigation on the chart and there will pop-up an operation
selection box, cli
ck “NAVI” button on the operation selection box to start navigation.
Method 2:
On the [HOME] p
age, click “NAVI Data” / “MOB” to go to navigation data / MOB list. On the
navigation data / MOB list, click
“NAVI” on the operation bar of the data that want to navigation
to start navigating.
*MOB: Man Over Board (an emergency in which a person has fallen off a boat or ship into the
water)
1.6.2 Call History Navigation Data
Click the "NAVI Data" APP on the [HOME] page to enter the navigation data list. Click the
"History navigation" button to enter the history Navi data list and click the "NAVI" button in the
operation bar on the right side of the data to be navigated again to start navigating from the
ship's position.
1.7 Plot Data Operation
Plot data includes point, line, and polygon.
1.7.1 Plot Data Creation
Method 1:
Click to confirm the starting point of plot data on the chart and there will pop-up an operation
selecti
on box. Click “Add” button on the operation selection box to confirm the adding.
[1] If it is to create a point, go on to click
“Confirm” button on the operation selection box and
select the data type as point to finish the point creation.
Click “Back” button to give up the point creation.
[2] If it is to create a line/polygon, go on to click on the chart to add nodes. After finish nodes
adding, click
“Confirm” button and select the data type as line/polygon. Click the "Save" button
to finish data creation.
Click “Back” button to give up the data creation.
Method 2:
On the [HOME]
page, click “Plot Data” APP to go to plot data list. On the plot data list, click
“Add” button and select add a point, line or a polygon to go to data adding page to input
LAT/LON data.