Koden CVS-FX2, Руководство по установке, Страница: 29 / 78

CVS-FX2/FX2BB Chapter 1 Installation
0092602002-12
1-9
1.4.2 Flush-mount installation
(1) Make a square hole at the location to be installed (See Fig.1.10)
(2) Remove 4 plastic corner guard caps of the Operation unit (These can be easily pulled out
upwards).
(3) Confirm that the Operation unit matches the square hole. If not matches, correct the
square hole.
(4) Put the Operation unit and connected cable in the square hole, and set it to the position in
which the Operation unit becomes parallel to the install panel. (Fig.1-9)
(5) Install the Operation unit in the installing location (square hole) and fix it with 4 tapping
screws (4mm) (M4 or pan-head). (Prepare 4 mm screws suitable for thickness of
installing location.)
(6) Install the corner guard caps removed in step (2).
Fig. 1.9 Flush-mount installation of Operation unit
Fig. 1.10 Hole for flush-mount installation of Operation unit
Attention: Thickness of panel: 10mm (max)
M4 Screw (4pcs)
Corner guard cap (4pcs)
Operation unit
Unit: mm (inch)