Troubleshooting
www.kodak.com/go/support
47
Picture orientation is
not accurate
■
Set the Orientation Sensor to ON (see
page 33
).
Flash does not fire
■
Open the flash unit (
page 9
).
■
Check the flash setting and change as needed (
page 20
).
NOTE: The flash does not fire in all modes.
Storage location is
almost or entirely full
■
Transfer pictures to the computer (
page 15
).
■
Delete pictures from the card (
page 13
) or insert a new one.
■
Change image storage location to internal memory (
page 31
).
Battery life is short
■
Make sure the correct battery type is installed (
page 60
).
■
Wipe the contacts with a clean, dry cloth before inserting a
battery in the camera.
■
Insert a new or charged battery (
page 2
).
You cannot take a
picture
■
Turn camera off, then on again. Make sure the camera is not in
Favorites mode.
■
Press Shutter button all the way (
page 5
).
■
Insert a new or charged battery (
page 2
).
■
Wait until the AF/AE indicator turns green before attempting to
take another picture.
■
Memory full. Transfer pictures to the computer (
page 15
), delete
pictures (
page 13
), change image storage location (
page 31
), or
insert another card.
Error message appears
on EVF/LCD
■
Turn the camera off, then on again.
■
Remove memory card from the camera.
■
Remove the battery and wipe the contacts with a clean, dry cloth.
■
Insert a new or charged battery (
page 2
).
■
Get customer support help (
page 51
).
Memory card not
recognized or camera
freezes with card.
■
Card may be corrupted. Format card in camera (see
page 33
).
■
Use another memory card.
If...
Try one or more of the following
