71
Connecting to your Printer
1. Make sure both the camera and printer are turned on.
2. Connect one end of the supplied micro USB cable to
the USB port on your camera.
3. Connect the other end of the micro USB cable to the
USB port on the printer.
If the camera is not connected to a PictBridge compatible
printer, the following error message will appear on the
LCD screen.
The error message above will also appear if the
USB mode is set incorrectly, in which case you
should disconnect the micro USB cable, check
the USB mode settings, ensure that the Printer is
turned on, and then try connecting the micro USB
cable again.
