5
that are not taken using the product in these folders in case that the files cannot be normally recognized in playback.
• Not recommended that directly edit the data on the memory card. Copy the data to your computer disk before editing.
• Please turn the product off before removing the memory card. Otherwise, the memory card could be damaged.
• When the product is stored for a long period of time, please backup the data on the memory card and remove the memory card for storage.
Other Notes:
• Do not disconnect the power or turn the product off during the update process. Doing so may cause incorrect data to be written and the product may not
power on later.
• When using your product on an airplane, observe the relevant rules specified by the airline.
• Due to the limitations of manufacturing technology, the LCD may have a few dead or bright pixels. These pixels do no affect the quality of the photos or
video.
• If the LCD is damaged, pay particular attention to the liquid crystal in the screen. If any of the following situations arise, take the recommended immediate
action indicated below:
1. If liquid crystal comes in contact with your skin, please wipe with a dry cloth, wash thoroughly with soap, and rinse with plenty of clean water.
2. If liquid crystal gets into your eye, flush the eye immediately with plenty of clean water for at least 15 minutes and then seek for medical assistance.
3. If liquid crystal is swallowed, immediately flush your mouth thoroughly with clean water and induce vomiting. Seek for medical assistance.
Waterproofing Notes:
• This product is waterproof for the purposes of daily activities. Before use, please make sure to firmly tighten the lens cover, lock the battery cover, and
tightly close the side cover.
• Any scratches, cracks, or small foreign objects (such as sand or hair) attached to the rubber ring inside of the side cover will affect the efficacy of the
product’s waterproofing. Before use, please check to see whether the waterproofing rubber is damaged or contaminated with a foreign object before
closing the side cover. When there is a foreign object on the waterproofing rubber and its adjacent surfaces, please use a clean, lint-free dry cloth in order
to clean it. If there are any scratches or cracks, immediately go to a service center for maintenance and obtain a replacement waterproofing rubber.
•
Before using the product in water, please make sure to first place it inside of the waterproof housing. It can be submerged to a depth of 60 meters (196
feet) in water of a temperature not exceeding 40 ° C. The product can maintain its waterproof performance for up to 4 hours in water 60 m (196 feet) deep.
• Do not open the waterproof housing when submerged in water.
• Do not directly open the side cover or battery cover, nor should you remove the lens cover the product accidentally comes into contact with water. Please
turn off the power and wipe it with a clean, dry, lint-free cloth before opening the battery cover and side cover in order to remove the battery and the
memory card.
• When opening the battery cover and the side cover, if there are water droplets on the surfaces located between the interior and the body, please make sure
to wipe them off.
• After using the product in the presence of sand, mud or other foreign matter, please rinse it with clean water (please make sure to firmly tighten the lens
cover, lock the battery cover, and close the side cover tightly before rinsing). After rinsing, wipe it with a clean, dry, lint-free cloth.
Waterproof / Dustproof / Shockproof/ Freeze-proof:
• Installing the lens cover
, JIS / IEC waterproof grade 8 (IPX8).
•
Installing the lens cover, JIS / IEC dustproof grade 6 (IP6X).
•
Installing the lens cover, height for shockproof rating is 2.0m.
• Suitable temperature range for freeze proof capability is -10° C and above.
Содержание PIXPRO SP360
Страница 1: ...User Manual Action Cam SP360...
