51
www.kodak.com/go/support
Doing more with your camera
AF Control
Choose an auto-focus setting.
This setting is kept across
PASM and C1, C2, and C3
until you change it.
Continuous AF (default)—
uses external AF
sensor and TTL-AF (Through-The-Lens). Because the
camera is always focusing, there is no need to press
the Shutter button halfway down to focus.
Single AF
—
uses external AF sensor and TTL-AF
and does not focus until the Shutter button is pressed
halfway down.
AF Zone
Select a large or concentrated
area of focus.
This setting is kept across PASM
and independently in C1, C2,
and C3 until you change it.
Multi Zone (default)—
evaluates 25 zones (5x5) to
give an even picture focus. Ideal for general
picture-taking.
Center Zone—
evaluates the small area centered in
the viewfinder. Ideal when precise focus of a specific
area in the picture is needed.
Selectable Zone—
use
to move to
any of 25 focus zones (5 vertical x 5 horizontal).
Sharpness
This setting is kept across PASM
and independently in C1, C2,
and C3 until you change it.
High
Normal (default)
Low
Contrast
This setting is kept across PASM
and independently in C1, C2,
and C3 until you change it.
High
Normal (default)
Low
Setting
Icon
Options that appear in Liveview
