13
www.kodak.com/go/support
Quick Start Up
Tips and Troubleshooting
■
To improve reception, adjust the distance between the camera and the monitor, or
move the monitor away from other devices (cordless phones, Wi-Fi devices, etc).
You can also extend the antenna on the monitor.
■
To conserve battery power, use the AC adapter.
■
If you installed alkaline batteries in the camera, remove them during long periods
of non-use.
No picture or sound–Verify that the:
■
Monitor is turned on
■
AC adapters are plugged into a working, standard electrical outlet
■
Camera is properly linked
Sound but no picture–Verify that the:
■
Power-Saving mode is deactivated (
see page 11
). Press the On/Off button quickly
to activate/deactivate the display.
■
Monitor brightness is adjusted properly (
see page 11
).
■
Device locations are acceptable. Move the camera and monitor to different
locations.
Picture but no sound–
Increase the monitor volume.
Picture not clear
–
■
For Night Vision, position the camera within 6 ft (1.8 m) of the baby.
■
Test reception by moving the monitor and/or camera to a different location.
■
Move the monitor away from other devices (cordless phones, Wi-Fi devices, etc).
■
Adjust the monitor brightness (
see page 11
).
■
Position the monitor closer to the camera, if necessary.
Squealing sound–
Move the camera and the monitor farther away from each other.
urg_01344.book Page 13 Wednesday, October 26, 2011 3:48 PM